آشنایی با عملکرد تجهیزات پشتیبانی کف
The operation of the floor support equipment is briefly introduced. عملکرد تجهیزات پشتیبانی کف به طور خلاصه معرفی می شود. The floor support equipment must first install the following steel beams and then lay the floor support plate on the steel beam. تجهیزات پشتیبانی کف ابتدا باید تیرهای فلزی زیر را نصب کرده و سپس صفحه پشتی کف را روی تیر استیل قرار دهید. The contact between the floor support plate and the steel beam is generally anchored with anchors. تماس بین صفحه پشتیبانی کف و پرتوی فولادی به طور کلی با لنگر لنگر می رود. As for welding: floor support The slab laying is connected with the steel beam, the end of the slab is penetrated by spot welding with the steel beam, the pierce and the steel beam are penetrated and welded in the middle, and the special clamping pliers are used to connect the floor between the floor plates. در مورد جوشکاری: تکیه گاه کف: لایه لایه با تیر استیل متصل می شود ، انتهای دال با جوش نقطه ای با تیر فولادی نفوذ می کند ، سوراخ و پرتو فولادی در وسط نفوذ کرده و جوش داده می شود و انبردستهای مخصوص بستن برای اتصال کف بین صفحات کف استفاده می شود.
The floor support board equipment must first install the following steel beams, and then lay the floor support board on the steel beam, and the contact part between the floor support board and the steel beam is generally anchored with anchors. تجهیزات صفحه تکیه گاه کف ابتدا باید تیرهای فلزی زیر را نصب کرده و سپس تخته پشتی کف را روی تیر استیل قرار دهید و قسمت تماس بین تخته پشتی کف و پرتوی فولادی بطور کلی با لنگرها لنگر می رود. As for welding: the floor support board is laid and connected with the steel beam, and the board end The penetration welding of the head and the steel beam, and the penetration welding of the peg and the steel beam in the middle, در مورد جوشکاری: تخته کفپوش قرار داده شده و با پرتوی فولادی متصل شده است ، و انتهای تخته جوش نفوذ سر و پرتو فولادی ، و جوش نفوذ میخ و تیر فولادی در وسط ،
The floor slabs are connected with special clamping pliers to engage the pressure holes, and the plugs are spot welded to the floor slabs and steel beams with special galvanized plugs. صفحات کف برای اتصال سوراخهای فشار به انبردستهای مخصوص وصل می شوند و شاخه ها به صورت جوش داده شده در صفحات کف و تیرهای استیل با شاخه های مخصوص گالوانیزه قرار می گیرند. If it is an arc-shaped area, the special shape cutting of the floor slabs is cut by a plasma cutting machine , The incision is smooth, and the surface galvanized layer is complete. اگر این ناحیه به شکل قوس باشد ، برش شکل خاص تخته های کف توسط دستگاه برش پلاسما برش داده می شود ، برش صاف است و لایه گالوانیزه سطح کامل است.
تماس با شخص: Mr. Arno Hao
تلفن: +8618717894416